Save Your Tone
An excellent guitar and bass cable must meet 3 characteristics:
- Totally transparent on the signal
- Robust
- Soft and flexible, so that it is comfortable to use
If a cable is specific for \"blues\" or \"rock\" or maybe \"funky\" it means that the cable is not transparent on the signal, but it does provide equalization. This in our opinion is not a good feature.
Vinteck has always applied \"save your tone\" in all its products, ie the absolute maintenance of the signal and its own sound, starting from the guitar and arriving at the amplifier.
The "Vinteck Cable" were born to maintain this philosophy.
There are 2 cable families: connection (instrument-amp) and patch, for connecting the effects on the pedal board.
|
VCP515AA |
CABLE 5.5 MM PATCH 90° x 2 L 15 cm |
|
VCP525AA |
CABLE 5.5 MM PATCH 90° x 2 L 25 cm |
|
VCP535AA |
CABLE 5.5 MM PATCH 90° x 2 L 35 cm |
|
VCP520SA |
CABLE 5.5 mm PATCH 90° + short straight L 20cm |
|
VCP535SA |
CABLE 5.5 mm PATCH 90° + short straight L 35cm |
|
VCP550SA |
CABLE 5.5 mm PATCH 90° + short straight L 50cm |
Instrument patch cable:
Straight and angled professional jack
Poliethylene dielectric isolation
SN Copper conductor: 12x0.18
secondary shield : conductive PVC
Twisted copper shield: 80x0.1
PVC Outer sheath
Capacity less than 115pf/m
Conductor resistance: lower than 40 ohm/Km
Working temperature: -15 ° C to + 70 ° C
Polyethylene signal isolation
Diameter of cable: 5 mm
Colour: Black
